W&D Galvanized Steel Picket Bar Fence / Palisade Fencing And Gates
Steel palisade fencing provides maximum protection against vandals and intruders.
Cold rolled steel pales are attached to horizontal steel rails, which in turn are attached to vertical steel RSJ's, which are concreted or secured with plates or brackets.
This amounts to a virtually impenetratable steel barrier that is available in heights of up-to 3.2 metres. Palisade fencing is a good choice when considering security, versitility, low maintenance, and value for money.
Product Details
Pale Heads:
Square top. Triple point top Single point top, Round top, Round and notch top.
Pales:
Width: 65-70mm
Thickness: 2.0-3.0mm
Finishing: galvanized and polyester powder coated or hot dipped galvnaized
Head: single point, triple point
Height: 1.2m-3.0m
17pcs/set
Rail
Size: 50x50mm, 40x40mm (Angle Iron)
Thickness: 5.0-6.0mm
Finishing: galvanized and polyester powder coated or hot dipped galvanized
Holes: with 19 holes drilled on one edge side
Length: 2.7m
Screw Size: M8
Post
H Post Size: 100x68mm, 100x55mm, 120x74mm
Square Post Size: 60*60mm, 80*80mm
Thickness: 3.5mm-5.00mm
Finishing: galvanized and polyester powder coated or hot dipped galvanied
Head: cut sharp
Height: on the basis of pale height (1.2-3.0m)
Color: Green, yellow, blue, white, black, red etc.
Application
Railings, Industrial and Commercial premises, Schools and Colleges, Reservoirs, Railways, Motorways, Residential, Private mansions
Connection of Steel Picket Bar Fence
The steel picket bar fence panels are connected to the horizontals rail to form the panel and are held securely together by security fasteners(self-break screws) that are resistant to vandals.
Steel picket bar fence pales are offered in either steel finish or powder coated to a colour from our available selection.
Specifications
| 1. Type Standard Configuration |
| Panel Height | Pales | O/C Spacing | Rails |
| 8 | 13 ga. | 5-15/16" | 2" TS x 14 ga. |
| 10 | 13 ga. | 5-15/16" | 2" TS x 14 ga. |
| 12 | 13 ga. | 5-15/16" | 2" TS x 14 ga. |
| 2. Type Standard Configuration |
| Post | Optionally available with base plates for bolt-down or cranked over walls. Also available with bracket extensions for barbed wire or razor wire. Size: 100 x 55mm/100 x 44mm |
| Rails | Steel angle rails punched for pale attachment. Connected with 12mm square cup bolts and anti-vandal permacone (snap-off) nuts. Size: 40mm x 40mm/ 45mm x 45mm/ 50mm x 50mm |
| Pale tops | Split-tripple point or single point for high security. Rounded or rounded and notched for safety. |
| Fittings | Rails and pales are fitted using 'rivets & collars' or rounded bolts with permacone nuts (snap-off / anti-vandal). |
| Link Plates | Link plates, AKA 'Fish Plates' fit through the holes is the steel fencing posts and join the rails together. |
| STANDARD HEIGHT | PALE SECTION | HEAD PROFILE |
| 1.2M | 3.0mm "D" | ROUNDED & NOTCHED |
| 1.5M | 3.0mm "D" | ROUNDED & NOTCHED |
| 1.8M | 3.0mm "D" | ROUNDED & NOTCHED |
| 1.8M | 3.0mm "D" | TRIPLE POINTED |
| 1.8M | 2.0mm "W" | TRIPLE POINTED |
| 2.0M | 3.0mm "D" | ROUNDED & NOTCHED |
| 2.0M | 3.0mm "D" | TRIPLE POINTED |
| 2.0M | 2.0mm "W" | TRIPLE POINTED |
| 2.1M | 3.0mm "D" | TRIPLE POINTED |
| 2.1M | 2.0mm "W" | TRIPLE POINTED |
| 2.4M | 3.0mm "D" | TRIPLE POINTED |
| 2.4M | 3.0mm "D" | ROUNDED & NOTCHED |
| 2.4M | 2.0mm "W" | TRIPLE POINTED |
| 2.4M | 2.5mm "W" | TRIPLE POINTED |
| 3.0M | 3.0mm "D" | TRIPLE POINTED |
Palisade Fence Gate
Palisade gates, as the access to your premises, combine with palisade fence panel together to form a formidable barrier and solute your security problems. It can be manufactured with single or double leaves and available in swing and sliding styles as your request.
Product Tags:
|
|
W / D Galvanized Steel Picket Bar Fence , Railings Palisade Fencing And Gates Images
|
